Creation
Scopes are drafted automatically when you create a project — one for each trade Struction identifies in your documents — and redrafted when you add an addendum or revised set. Here's what goes into the draft, how long it takes, and how to add a trade it missed.
Updated 2 minApplies to: MapFeedback →
What happens at project creation
Struction reads the drawings and specs (and your company's exemplars, if you've set them up) and writes a complete first draft for every trade, working trade by trade. The first draft reflects two things at once: what your drawings and specs actually say, and your company's standard boilerplate.
Scope generation is the last stage of processing. It starts once the documents have been read and the risk register built, and it takes the longest: regenerating all 37 trades on our sample project took between 45 and 80 minutes. The scopes list doesn't show progress trade by trade, so give it time before you start reviewing.
Where the trades come from
Trades come from Struction's trade taxonomy, which is wired to CSI. Every generated scope carries a CSI code and a CSI-based name. Your exemplars and organization preferences shape how finely trades are broken out — if your company always splits Fire Alarm from Electrical, say so in AI preferences before you create the project.
Adding a scope Struction missed
Two ways:
- Click + at the top of the Scopes of work panel, or open its ⋮ menu and choose Create or modify Scopes.
- Ask chat: Create a Security Access scope of work from the drawings and specs, and make sure it doesn't overlap Electrical. Chat drafts it with sourced items and shows you an approval card before anything is saved.
Good to know — Preferences and exemplars apply to projects generated after you set them up. A project generated earlier won't reflect them unless you regenerate its scopes — see Editing.
When you add documents later
Adding an addendum or a revised set re-runs scope generation for the project. The new issuance's card in the band shows a progress line — click it to see the Generating scope of work stage — and when it's done, the card's summary says Scope regenerated. See Upload.
When generation doesn't finish
If generation fails after an upload, the issuance card's summary says Scope regeneration failed in red. Ask chat to regenerate the trade you need, or create it fresh with + in the Scopes of work panel. If it fails again, write to help@struction.com with the project name — see Troubleshooting.
Workflow example — You upload a medical-office project and, once generation finishes, have draft scopes for Mechanical, Electrical, Plumbing, Structural, Fire Protection, and the rest — each already populated with inclusions and exclusions drawn from the actual sheets. Your job shifts from writing scopes to reviewing and sharpening them.
More docs