News

Dispatch.

Everything you need to know about Struction’s latest.

Every other Tuesday. One idea, not a roundup.

Latest

Everything, newest first

A Flooring quantity named 1st grade classrooms - LVT with the formula area × waste printed under the name and under each measurement.

Nov 2026

See the formula behind every quantity

Formula-driven quantities now show their formula under every measurement, and values like a waste factor or a beam height can be saved as named constants anyone on the team can read.

Shipped

Floor plan A11-01D of an elementary school with six first-grade classrooms highlighted in blue, and the Quantities panel showing 6 selected across 6 quantities with buttons for Move to, Group into new quantity, Tags, Scope and Delete.

Nov 2026

Regroup and scope a whole floor of takeoffs at once

Select takeoffs on the sheet and group, move, tag or scope them together, instead of going through them one by one. It’s most useful right after an Auto room pass.

Shipped

Struction with floor plan A11-01A open. In the chat bar, an Excel card named Crossland_BP-09B sits above the request: check this BP-09B bid form against the drawings and specs, then give it back corrected, in our Crossland format, ready to send to flooring subs.

Oct 27th, 2026

Attach your form. Get it back finished.

Project chat now works on your own paperwork. Attach a bid form, a responsibility matrix or an estimate sheet, and get it back checked against the drawings and specs, under your company’s header, ready to export.

Shipped

Floor plan A11-01E with 40 detected rooms shaded blue, and a review bar at the bottom reading 40 rooms found, Edit masks, Save 40 rooms and Dismiss.

Oct 22nd, 2026

Auto room: let the plan count its own rooms

Auto room outlines every room on a scaled floor plan, waits for your review, then saves each one as its own area quantity. Area Takeoff draws curves now too.

Shipped

Lighting ceiling plan EL11-01A in Struction with blue auto count boxes on the shaded emergency fixtures in the cafeteria. The results bar along the bottom reads 10 symbols found, Confidence 10%, with Add boxes, Save as count and Dismiss.

Oct 13th, 2026

Auto count now searches a whole trade

Auto count now searches the sheet you’re on or every sheet in the trade, and a Confidence slider sets how close a match has to be. Here’s how to run it, and how to set it up for your symbol.

Shipped

Struction artifact, warranty section, marked unresolved. It states that Section 07 54 19 and its warranty language were not found, and that the 20-year manufacturer warranty in Section 07 14 13 covers hot fluid-applied rubberized asphalt waterproofing, not the PVC roof. A source chip sits under each paragraph.

Oct 13th, 2026

Artifacts: your company’s paperwork, drafted from the drawings and specs

Artifacts let project chat produce your company’s own paperwork, from scope briefs to responsibility matrices and submittal logs, drafted from the drawings and specs with every line tied to its source.

Shipped

A demolition plan carrying two markups in two different scope colors: an orange cloud around the canopy for Demolition, and an olive highlight along the existing waste line for Site Utilities. The scope bar runs along the bottom with each trade's tag and number, and a banner names the scope being drawn in.

Sept 21st, 2026

Linking markups to a scope of work

A precon team described the tool they wanted in about two sentences. Markups that are the link to a scope, colored by trade. That's built.

Shipped

The Quantities panel listing every quantity in a project, with a source column

Sept 15th, 2026

Quantities panel

Every measured quantity in the job listed in one place, each one still attached to the shape it was measured from. What the panel does, and how to walk a number back to the sheet it came off.

Shipped

The Create preset dialog in Struction's takeoff settings, on the Inputs and Outputs tab. An input labeled Depth (in) is set to 6 and bound to the variable depth_in, and two outputs are listed: Plan area returning Area in square feet, and Volume returning Volume in cubic yards from the expression area x depth_in divided by 12 divided by 27.

Sept 15th, 2026

Measurement presets

Save the takeoff setup once and reuse it. A preset holds the measurement type, units, depth, appearance and derived outputs, and arms all of it in one click from a library your organization shares.

Shipped

Sheet E5.01 in Struction with a red comment pin dropped beside the transformer schedule. A composer headed E5.01 fills with the question "Riser shows T-L4 at 75 kVA but this schedule reads 45. Which is current in Addendum 1?", then typing "Riggs" narrows the mention list to a single teammate, Riggs Struction.

Sept 15th, 2026

Comments on the drawing

Leave a thread where the question is, on a sheet, an entity, a quantity or a single measurement. Plus how the anchor resolves itself when a sheet gets reissued.

Shipped

The Collaboration panel's assignment list, each row showing the scope and who it went to.

Sept 7th, 2026

Assigning scope gaps

Twenty-six open gaps on a job is twenty-six questions, and a list that long belongs to nobody in particular. Now you can put a name on one.

Shipped

A structural sheet with changes marked in red and green, comparing two issuances.

Sept 1st, 2026

Addenda Comparison

Upload every issuance of a set and Struction stacks them in order, marks what moved, and answers from the current version. What it does and how to run it.

Shipped

May 2026

Struction, reconstructed

A new look for a new kind of pre-construction tool. Same grit, more wit.

Inside Struction

Follow the releases

See what shipped before you need it.

Every other Tuesday: what’s new in Struction, how it works on a real set of drawings, and what it changes for your takeoff.